Suspension tester and roller brake tester connected to the common PC based control unit (Windows OS, widescreen monitor) with test procedure that efficiently uses both ground units.
Compact heavy duty EUSAMA principle suspension tester (other evaluation methods – Minimum Phase Shift, Damping Ratio) for cars and vans up to 4 ton drive-over weight and 1.7 ton maximum testing axle weight. 8 point weighing system, allowing also to show wheel position anywhere on the measuring plate (660 x 340 mm, not sealed). Single part hot-dip galvanized frame, power supply 3/N/PE 400V AC/50Hz.
Roller brake tester for cars and vans up to 4 tons axle drive-over weight and up to 2.4 ton maximum testing axle weight, up to 6 kN maximum brake force, up to 2×4 kW motor power, standard test speed 5.5 km/h, rollers 205×700 mm, single part hot-dip galvanized frame, power supply 3/N/PE 400V AC/50Hz.
ST515 | |
Technical data | |
---|---|
Basic test method | EUSAMA (0-100%) |
Other evaluation methods | Minimum phase shift (0-180⁰), Damping ratio (0-0.3) |
Tire stiffness | 50-500 N/mm |
Motor power (2 motors) | 2 x 1.5 kW |
Motors driven by freq. inverter | No |
Maximum testing axle weight | 1700 kg |
Axle weight measuring range | 2500 kg |
Maximum drive-over axle weight | 4000 kg |
Measuring plate dimension | 660 x 340 mm |
More
|
RP622 | RP630 | RP640(H) | |
Technical data | |||
---|---|---|---|
Maximum drive-over axle weight | 3000 kg | ||
Maximum testing axle weight | 1600 kg | 1600 kg | 2400 kg |
Maximum brake force | 4 kN | 4 kN | 6 kN |
Test speed | 2.7 km/h | ||
Motor power (2 motors) | 2 x 2.2 kW | 2 x 3 kW | 2 x 4 kW |
Roller size | 205 x 700 mm | ||
Distance of rollers | 400 mm | ||
Rollers elevation | 0 mm | ||
More
|