Categories

RP600-PC

Characteristics

RP600

Roller brake testers with PC based control unit (Windows OS, widescreen monitor) for cars and vans up to 4 tons axle drive-over weight and up to 3.2 ton maximum testing axle weight, up to 8 kN maximum brake force, up to 2×5.5 kW motor power, standard test speed 5.5 km/h, rollers 205×700 mm, single part hot-dip galvanized frame, power supply 3/N/PE 400V AC/50Hz.

Features

  • Widescreen LCD monitor 22” – 32”, supported native screen resolutions from 640x480 to 2560x1600 pixels
  • Highly customizable error and warning setting according to specific country limit values
  • Automated guided test with possibility of automatic results printout and/or save results (graphs and values) in Adobe Acrobat format (pdf), correct results in green color/wrong results in red color optionally - unsafe results in yellow color
  • Manual motor run.
  • Numeric brake force imbalance indication during the test, color indication of limit value exceed
  • Highest brake force imbalance evaluation after test
  • Slip indication (in color).
  • Support for 4x4 vehicle testing
  • Total-, axle-, and wheel-weights in kg or daN
  • Safety functions during system and motors start up, providing protection for either people working around tester or protecting tester itself from damage
  • Motors protection IP55 (=splash proof), strain gage transducers with even higher protection level IP65
  • Automatic zero adjustment before test
  • Tester error check procedure
  • Possibility to start (from the tester control software) relation of remote support (through TeamViewer). It is possible to start this remote support relation only if the computer is connected to the internet.
More characteristics

Options

  • Side slip meter
  • Infrared remote controller
  • Color printer
  • Membrane keyboard
  • 3 x 240 V or 60 Hz net frequency
  • Split version of in ground part
  • Installation frame
  • Pedal force meter.
  • Rollers drive-over covers
  • Motorbike testing kit
  • Motors soft starters
  • Calibration set
  • Weighing up to 4 t (4 or 8 point)
  • Upgrade to the full test lane

Delivery

  • Control unit
  • Pc with os., monitor, keyboard, mouse
  • PC software
  • Ground unit with 12 m cable

Specification

RP622 RP630 RP640(H) RP655
Technical data
Maximum drive-over axle weight 3000 kg 4000 kg 4000 kg 4000 kg
Maximum testing axle weight 1600 kg 1600 kg 2400 kg 3200 kg
Maximum brake force 4 kN 4 kN 6 kN 8 kN
Test speed 2.7 km/h 5.5 km/h 5.5 km/h 5.5 km/h
Motor power (2 motors) 2 x 2.2 kW 2 x 3 kW 2 x 4 kW 2 x 5.5 kW
Roller size 205 x 700 mm
Distance of rollers 400 mm
Rollers elevation 0 mm
Measuring system strain gage sensors
Minimum/maximum test width 800/2200 mm
Minimum/maximum wheel size 450/1100 mm
Weights
Installation frame 80 kg
Ground unit 390 kg 405 kg 420 kg 430 kg
Control unit 66 kg
Basic dimensions
Installation frame 2370 x 690 x 300 mm
Ground unit 2340 x 660 x 300 mm
Control unit 530 x 572 x 1290 mm w/o monitor
Electric supply
Total load 5.6 kVA 7.5 kVA 9.7 kVA 12.8 kVA
Connection 3NPE-50 Hz 400 V / TN-S
More